Diving material purchase
Neoprene (SBR CR Diving Materials) How To Shop: If you want to order neoprene but do not know how to get started, do the following:
one. First determine the neoprene you need, according to the product you want to choose the right material. If you do not know how to choose, please tell us your purpose, our professional staff will recommend to you the right material. Or send your samples to us, we help you identify.
two. Please tell the total thickness of the patch you need, you can use the vernier caliper, (preferably measured with a professional thickness gauge), because neoprene is a soft material, the measurement pressure can not be too large to vernier caliper can move freely as well.
three. Please advise what fabric needs to be laminated, such as Lycra, nylon cloth, mercerizing cloth and so on. If you can not judge what fabric, please send us the sample.
four. Please tell you the need to fit the fabric color, please look at the color is our standing color, if yes, please tell us the color number. If not, please send the samples, or inform the transmission color, we can provide fixed dyeing. However, if the amount is less than 100KG, an extra charge will be charged.
V. Whether the need for solvent-resistant bonding fit, you need to see where your product is used, if the product is the sea, such as diving clothing, diving gloves, etc., will need solvent bonding. General gifts, protective gear, such as ordinary fit. If you are unsure, please let us know what we use and we can help you decide.
six. How to choose to choose to buy inch, we have the optional size 51 × 130,51 × 83, there are 42 × 130 and other specifications. Depending on your cutting layout requirements, generally speaking, 51 × 130 layouts save more material. For loading container materials, should choose 51 × 83 specifications, more suitable for loading.
Seven. Delivery: Usually delivery for 4-7 days, such as the need for special dyeing, delivery of 15 days.
Eight. Packing: usually package, please open the square immediately after receiving the goods, otherwise due to curling, the core part will have creases.
nine. Thickness and length error: thickness error is generally about plus or minus 10%. If 3mm thickness, the actual thickness of 2.7-3.3mm between. The minimum error of about plus or minus 0.2mm. The maximum error is plus or minus 0.5mm. Length error of about plus or minus 5%, usually longer, wider.